VICTREX LMPAEK™ ポリマー 101 GRA

VICTREX LMPAEK™ POLYMER 101 FPD10

VICTREX LMPAEK 101 FPD10 is a high performance thermoplastic material, a PEEK based copolymer in the PEEK semi crystalline family. The powder may be used for coating / spraying. Natural / beige in colour.

Last updated: 04 October 2026

Request a quote Download PDF

Material Properties
Physical	Nominal Value	Unit	Test Method
Density (Crystalline)	1.25	g/cm³	ISO 1183
Apparent (Bulk) Density	0.28	g/cm³	ISO 1183
Average Particle Size D50	10	µm	ISO 13320-1
Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature¹ (Midpoint)	153	°C	ISO 11357
Melting Temperature¹	305	°C	ISO 11357
Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (400°C)	175	Pa·s	ISO 11443
Additional Information
Drying Temperature / Time: 150°C / 3h or 120°C / 5h (residual moisture <0.02%) Curing Temperature: Oven curing at 340 - 360°C / 5 – 10 min Important notes: 1. Data are generated in accordance with prevailing national, international and internal standards, and should be used for material comparison. Actual property values are highly dependent on part geometry, mould configuration and processing conditions. Properties may also differ for along flow and across flow directions. 2. PEEK – PolyEtherEtherKetone 3. PAEK - PolyArylEtherKetone Data available on our website www.victrex.com or upon request.

Notes

¹2nd Cycle